{"product_id":"6-pack-fuel-injection-cleaning-flush-machine-fuel-injector-cleaner-8-oz-each","title":"6 \/ PACK Fuel Injection Cleaning Flush Machine Fuel Injector Cleaner 8 Oz Each","description":"\u003cp\u003eMOTORCRAFT  PM5-6.  Condition: New.  \u003c\/p\u003e\n\n\u003cp\u003ePLEASE NOTE: THIS IS FOR USE WITH A FUEL INJECTION FLUSH \/ CLEANER MACHINE ONLY. THIS DOES NOT GO IN YOUR GAS TANK. FOR PROFESSIONAL USE ONLY.\u003c\/p\u003e\n\n\u003cp\u003eApparatus\n\u003cbr\u003eThe apparatus must be comprised of the following equipment as a minimum. The apparatus must\n\u003cbr\u003ehave a solvent tank with a volume of at least 3 pints. The tank must be capable of connecting to the\n\u003cbr\u003evehicles fuel system to feed fuel to the engine, preferably before the fuel filter. The apparatus must\n\u003cbr\u003ehave means to supply and control fuel under pressure to the vehicle’s fuel system, for example by an\n\u003cbr\u003eelectric fuel pump, to allow the engine to run using the gasoline\/cleaner mixture in the apparatus. A\n\u003cbr\u003efuel pressure gauge to measure fuel pressure is required to monitor fuel pressure. It is recommended\n\u003cbr\u003ethat the apparatus has a filter to clean the gasoline\/cleaner mixture before entering the vehicle’s fuel\n\u003cbr\u003esystem, if the apparatus isn’t attached before the vehicle’s fuel filter.\n\u003cbr\u003eCleaning procedure\n\u003cbr\u003eFor cleaning fuel injectors first mix 8 fluid ounces of PM-5 Power Flush Injector Fluid with 2 pints of\n\u003cbr\u003egasoline in the solvent tank and stir thoroughly. Do not attempt run the engine on only PM-5 Power\n\u003cbr\u003eFlush Injector Fluid. Disconnect the return fuel line from the vehicle’s fuel tank and plug the line from\n\u003cbr\u003ethe fuel injector manifold. This plug must be able to withstand fuel system pressure. Disable the\n\u003cbr\u003evehicles fuel pump relay and disconnect the fuel line before the fuel filter or at the inlet of the fuel\n\u003cbr\u003einjector manifold. At the point where the vehicle’s fuel line was disconnected, connect the fuel feed\n\u003cbr\u003ehose on the apparatus to provide the fuel supply to the vehicles fuel injection system. If the apparatus\n\u003cbr\u003edoesn’t have its own fuel filter, if possible, make this connection before the vehicle’s fuel filter so the\n\u003cbr\u003efluid goes through the fuel filter before entering the fuel injectors, otherwise connect the feed line\n\u003cbr\u003eto the inlet of the fuel injector manifold. Apply fuel pressure to the fuel feed line and fuel injection\n\u003cbr\u003emanifold by whatever means capable\/recommended for the apparatus being used, electric pump, air\n\u003cbr\u003epressure, etc. Check the shop manual for the vehicle to determine the necessary fuel pressure to run\n\u003cbr\u003ethe engine at an 1800 rpm idle speed and adjust the apparatus fuel system pressure to this pressure.\n\u003cbr\u003eCheck the system for leaks. Repair any leaks before proceeding further. With the proper fuel pressure\n\u003cbr\u003estart the vehicle’s engine and check for leaks. Repair any leaks before proceeding further. Set the\n\u003cbr\u003eengine idle speed at 1800 rpm if possible and run the engine until the solvent tank is empty. At this\n\u003cbr\u003epoint shut off pressure to the fuel injection manifold by shutting off whatever mechanism is used to\n\u003cbr\u003eachieve fuel pressure. The engine will continue idling until the speed drops or fluctuates indicating\n\u003cbr\u003ethat the fuel supply line is emptied of gasoline\/cleaner mixture. At this point the engine is shut off and\n\u003cbr\u003ethe cleaning apparatus is disconnected. Remove the plug from the return line and allow the system\n\u003cbr\u003eto drain. Reassemble the vehicles fuel system and enable the vehicle’s fuel pump relay. Restart the\n\u003cbr\u003eengine and check the fuel system for leaks.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"\u003ca href=\"https:\/\/sparksurplus.com\/pages\/part-condition#MainContent\"style=\"color: inherit;\"\u003eNew\u003c\/a\u003e","offer_id":50643581370671,"sku":"APB57993119","price":94.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/1713\/5919\/files\/motorcraft_pm5-6_1_dba85cda-7eb9-491b-b111-8d0d2860de44.jpg?v=1730306069","url":"https:\/\/sparksurplus.com\/products\/6-pack-fuel-injection-cleaning-flush-machine-fuel-injector-cleaner-8-oz-each","provider":"Spark Surplus Auto Parts","version":"1.0","type":"link"}